| |
年月日 |
題 名 |
著 者 名 |
巻・号・ページ |
| 1 |
1971.05 |
Analytical Method in Machine-Tools Vibrations（Method for Analogue Computer） |
N.Tominari,
K.Seto |
Bulletin of the JSME
Vol.14,No.71, pp.427-437 |
| 2 |
1973.04 |
Analysis and Compensation of Mechanical-Tools Vibrations by Feedback Theory |
N. Tominari ,
K. Seto |
Bulletin of the JSME
Vol.16,No.93, pp.513-528 |
| 3 |
1976.07 |
On the Dynamic Beheviour of the Feedback Controled Feed Drive |
K. Seto ,
K.Yamada |
Bulletin of the JSME
Vol.19,No.133, pp.814-821 |
| 4 |
1976.11 |
Effect of a Variable Stiffness Type Dynamic Damper on Machine Tools With a long Overhung Ram |
K. Seto ,
N. Tominari |
Bulletin of the JSME
Vol.19,No.137, pp.1270-1277 |
| 5 |
1978.08 |
Effect of a Variable Stiffness Type Dynamic Absorber on Improving the Performance of Machine Tools with a long overhung Ram |
K.Seto |
Annals of the CIRP
Vol.27/1,
pp.327-332 |
| 6 |
1978.10 |
On the Effect of a Variable Stiffness Type Dynamic Absorber with Eddy- Current Damping |
K.Seto,
M.Yamanouchi |
Bulletin of the JSME
Vol.21,No.160, pp.1482-1489 |
| 7 |
1979.04 |
New NC Device for Feedback Controlled Feed Drive |
K.Seto |
Int.J.of MTDR
Vol.19,No.2, pp.53-67 |
| 8 |
1979.07 |
Study on a Variable Stiffness Type Dynamic Damper with Eddy-Current Damping |
K.Seto |
Proc.of the 5th IFToMM
Vol.1, pp325-328 |
| 9 |
1980.02 |
Influence of Trotional Vibration of Geer Train System on the Tooth Load |
Y.Furuya,K.Seto,
M.Yamanouchi,
K.Yamada |
Bulletin of the JSME
Vol.23,No.176, pp.300-308 |
| 10 |
1981.11 |
An Investigation of the Vibration Isolation Equipped with Dual Dynamic Dampers as a Damping Element (1st Report, Optimum Adjustment) |
K.Iwanami ,
K.Seto |
Bulletin of the JSME
Vol.24,No.197, pp.2013-2019 |
| 11 |
1983.07 |
Vibration Isolation using Feedback Control and Compound Dynamic Absorber for portable Vibration Tools |
K.Kaneda ,
K.Seto |
Bulletin of the JSME
Vol.26,No.217, pp.1219-1225 |
| 12 |
1984.09 |
An Optimum Design Method for Dual Dynamic Damper and its Effectiveness |
K.Iwanami ,
K.Seto |
Bulletin of the JSME
Vol.27,No.231, pp.1965-1973 |
| 13 |
1985.05 |
The Applicatuon of a Software Servo Control System to Robot Manipurators |
Y.Takita,K.Seto,
N.Tominari |
Bulletin of the JSME
Vol.28,No.239, pp.937-942 |
| 14 |
1986.04 |
Optimal Control of Robotic Manipulators by a Software Servo Device |
Y.Takita,K.Seto,
T.Nakamizo |
Bulletin of the JSME
Vol.29,No.250, pp.1274-1279 |
| 15 |
1987.09 |
Method of Estmating Equivalent Mass of Multi-Degree- of- Freedom system |
K.Seto,S.Yamashita
M.Ohkuma, A.Nagamatsu |
JSME International Journal
Vol.30,No.268 pp.1638-1644 |
| 16 |
1989.01 |
The Static Balance and the Semidynamical Walking of a Quadrupedal Robot |
Y.Takita , K.Seto |
JSME Int.J,Ser.C Vol.32,No.1 pp.51-59 |
| 17 |
1989.05 |
Multi-directional Walking of a Quadrupedal Robot using the Four Links Steering
System |
Y.Takita, K.Seto |
Proc. of the Int. Conf. on Advanced Mechatronics PP.667-682 |
| 18 |
1989.12 |
Vibration Control in Piping System by Dual Dynamic Absorbers (3-D Vib.Analysis and Absorber Desigh Using Transfer Matrix Method) |
S.Yamashita ,
K.Seto |
JSME International Journal
Vol.3,No.4
pp.531-537 |
| 19 |
1990.02 |
Active Control of Vibration of Flexible Arms |
K.Seto |
J.of Robotics and Mechatronics Vol.2,No.1 pp.3-11 |
| 20 |
1990.09 |
Vibration Control of a Plate Structure by an Active Control Device for Reducing Noise |
K.Sawatari ,
K.Seto |
JSME International Journal
Vol.33,No.3
pp.453- 459 |
| 21 |
1990.09 |
Vibration Control of the Structure with Active Mechanical Component |
S.Kizimoto,K.Seto,Y.
Kanemitsu,
A.Nagamatsu |
JSME International Journal
Vol.33,No.3
pp.441- 445 |
| 22 |
1990.12 |
Vibration Control in Piping System by Dual Dynamic Absorbers (Realization of Piping systems with Untiresonant Characteristics) |
S.Yamashita ,
K.Seto |
Vol.33,No.4
pp.488- 494 |
| 23 |
1991.05 |
|
|
SAE Technical Paper, 911067 PP.229-237 |
| 24 |
1991.05 |
|
|
SAE Technical Paper, 911055 PP.141-147 |
| 25 |
1991.10 |
A Study on Active Dynamic Absorber |
|
ASME Conference DE-Vol.38 PP263-270 |
| 26 |
1991.11 |
Active Vibration Control in Machinery |
K.Seto |
The.J.of the Acoustical Society of JapanVol.12,No.6 pp.263-272 |
| 27 |
1992.09 |
Development of an Autonomous Cleaning Robot with an External Power Cable |
H.Furusawa, S.Minami
H.Takemoto,K.Seto
T.Takita |
Paper presented at the 1st MOVIC pp499-504 |
| 28 |
1992.09 |
|
|
Electromagnetic Forces and Applications, Elsevier pp.489-492 |
| 29 |
1992.09 |
Active Dynamic Absorber with Electromagnetic Force and its Vibration Control
Effect |
K.Sawatari , K.Seto |
Electromagnetic Forces and Applications, Elsevier pp.485-488 |
| 30 |
1993.02 |
Current Trends in Vibration Control |
K.Seto |
Now ＆ Future Vol.8 No.31 pp.2-7 |
| 31 |
1994.06 |
Active Vibration Control of Flexible Structures Arranged in Parallel |
K.Ezure,S.Mitsuta,
K.Sawatari,K.Seto |
J.of Robotics and Mechatoronics Vol.6,No.3 pp.243- 248 |
| 32 |
1994.06 |
Active Control :Control Theory as Viewed from Applications |
K.Seto |
J.of Robotics and Mechatoronics Vol.6,No.3 pp.184- 190 |
| 33 |
1994.08 |
A Study on Active Vibration Control of Plate Stuructures for Isolating
Noise |
K.Sawatari , K.Seto |
J.of Robotics and Mechatoronics Vol.6,No.3 pp.285- 291 |
| 34 |
1994.08 |
Experimental Study on Arragements of Setting Points of an Actuator and Sensor for Vibration Control of Flexible Structures |
K.Ezure , K.Seto |
J.of Robotics and Mechatoronics Vol.6,No.4 pp.292- 297 |
| 35 |
1994.09 |
A New Method for Making a Reduced-Order Model of Flexible Structures using Unobservability and Uncontroliability and its Application in Vibration control |
K.Seto
S.Mitsuta |
JSME Int.J,Ser.C Vol.37,No.3 pp.444- 449 |
| 36 |
1994.09 |
Active Vibration Control of Flexible Structures Arranged in Parallel |
S.Mitsuta, E.Okawa
H.Ito, K.Seto |
JSME Int.J,Ser.C Vol.37,No.3 pp.444- 449 |
| 37 |
1994.10 |
Vehicle Vibration Reduction by Transfer Function Phase Control on Hydraulic
Engine Mounts |
M.Ishihama,S.Satoh,
A.Nagamatsu ,K.Seto |
JSME Int.J,Ser.C Vol.37,No.3 pp.536- 541 |
| 38 |
1995.08 |
Vibration Control of Engine Roll and Bounce Using Hydraulic Engine Mounts |
M.Ishihama , K.Doi,A.
Nagamatsu , K.Seto |
J.of Robotics and Mechatoronics Vol.7,No.4 pp.285- 294 |
| 39 |
1996.04 |
Vibration Control Method for Parallel Structures Connected by Damper and
Spring |
K.Iwanami, K.Suzuki, K.Seto |
JSME Int.J,Ser.C Vol.39,No.4 pp.714- 720 |
| 401 |
1997.02 |
Feedback Structure-Borne Sound Control of a Flexible Plate with an Electromagnetic Actuator : The Phase Lag Problem |
M.Z.Ren,K.Seto,
F.Doi |
Journal of Sound Vibration205(1),57-80 |
| 41 |
1998.02 |
Feedback Vibration Control of a Flexible Plate at Audio Frequencies by using a Physical State-space Approach |
K. Seto, M. Ren
F. Doi |
Journal of the Acoustical Society of America
Vol.103, No.2, pp.924-934 |
| 42 |
1998.09 |
Trends on Active Vibration and Noise Control |
K.Seto |
International Journal of The Japan Society for Precision Engineering
Vol.32,No.3, pp.155-159 |
| 43 |
1998.10 |
Active Suspension Control of Elastoc Car Structure |
Y.Fujisaki,.odaka,
Y.Kawagou,
K.Seto |
Journal of Robotics and Mechatronics
Vol.10,No.1,
pp.56-61 |
| 44 |
1999.01 |
Vibration Control of Bridge Towers using a Lumped Modeling Approach |
K. Seto, F.Doi and M. Ren |
Transaction of ASME, Journal of Vibration and Acoustics
Vol.121,
pp.95-100 |
| 45 |
1999.09 |
Vibration Control of Parallel Structures Connected with Passive Devise
Designed by GA |
S.Sakai, S.Sugino, K.Seto
R.E.Christenson, B.F.Spencer |
Proceedings of 1990 ASME Conference DETC99/MOVIC-8430 |
| 46 |
2000.03 |
Multimode Vibration Control of a Flexible Structure Using H∞-Based Robust
Control |
I.N.Kar,F.Doi,K.Seto |
IEEE Transactions on Mechatronics Vol.5,No.1,pp.23-31 |
| 47 |
2000.03 |
Modeling Method and Filtered LQ Control Theory |
N.Hori,K.Seto |
JSME International Journal
Series C,
Vol.43, No.3 pp.697-703 |
| 48 |
2000.03 |
Active Vibration Control of Triple Flexible Structures Arranged in Parallel |
H.Haramoto,K.Seto
,Y.Koike |
JSME International Journal
Series C,
Vol.43, No.3 pp.712-718 |
| 49 |
2000.04 |
Bending and Torsional Vibration Control of Flexible Structure Using H∞-Based Robust Control Law |
I.N.Kar,T.Miyakura,
K.Seto |
IEEE Transactions on Mechatronics
Vol.8,No.3,
PP.545-553 |
| 50 |
2001.09 |
Modeling and Feedback Structural Acoustics Control of a Flexible Plate |
K. Seto, M. Ren
F. Doi |
Traanssactions of The ASME, J. of Vibration and Acoustics
Vol.123 No.1, pp. 18-23 |
| 51 |
2002.04 |
Motion and Vibration Control of Transport System with Flexible Structures |
K.Seto,Y.Matsumoto,I.N.Kar |
Third World Conference on Structural Control Wiley, Vol.3,
pp253-261 |
| 52 |
2002.04 |
Vibration Control for Multiple Connected Building using Active Controlled
Bridges |
H.Tanaka, D.Fuji, K.Seto, T.Watanabe |
Third World Conference on Structural Control Wiley, Vol.3,
pp253-261 |
| 53 |
2002.08 |
Motion and Vibration Control of Three Dimensional Flexible Shaking Table Using LQI Control Approach (1) |
K.Seto,D.Fuji, H.Hiramatsu,
T.Watanabe |
2002American Control Conference CD-LOM
TP07-1 3040 |
| 54 |
2003.03 |
Modeling and Control of Flexible Multibody Systems:Applocation to Elastic Vehicles |
T.Sagane, H. Tajima
K. Seto |
JSME International Journal
Ser.C, Vol.46, No.2,pp.533-539 |
| 55 |
2003.04 |
Coupled Building Control Using Acceleration Feedback |
R.E.Christenson,
B.F.Spencer,
N.Hori, K.Seto |
Computer-Aided Civil and Infrastructre Evgineering18
pp.4-18 |
| 56 |
2004.08 |
Modeling and Multi-mode Vibation Control for Flexible Space Structures |
K.Seto, K.Makita |
Conference on Methods and Models in Automoation and Robotics
Vol１
pp.647-752 |
| 57 |
2005.07 |
Active Control for Lightweight Isolation Systems |
K.Seto, M.Naruke, Taichi Watanabe, H.Morino |
IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures |
| 58 |
2005.07 |
Active Vibration and Sound Trasmission Control of Ploate Structures |
K.Seto |
The First International Symposium on Advanced Technology of Vibration and
Sound, PP229-235 |
