Seto-Engineering Office

Home Biograph Curriculum Vitae Thesis list Access us Japanese site
Thesis list
i@o
(1) N.Tominari, K.Seto, Analytical Method in Machine-Tools VibrationsiMethod for Analogue Computerj, Bulletin of the JSME Vol.14, No.71, pp.427-437, 1971.
(2) K. Seto, N.Tominari, Analysis and Compensation of Machine-Tools Vibrations by Feedback Theory, Bulletin of the JSME Vol.16, No.93, pp.513-528,1973.
(3) K. Seto, K.Yamada, On the Dynamic Behavior of the Feedback Controlled Feed Drive, Bulletin of the JSME Vol.19, No.133, pp.814-821, 1976.
(4) K. Seto, N. Tominari, Effect of a Variable Stiffness Type Dynamic Damper on Machine Tools with Long Overhung Ram, Bulletin of the JSME, Vol.19, No.137, pp.1270-1277, 1978.
(5) K. Seto, Effect of a Variable Stiffness-Type Dynamic Absorber on Improving the Performance of Machine Tools with a long overhung Ram, Annals of the CIRP, Vol.27/1, C23, pp.327-332, 1978.
(6) K. Seto, M. Yamanouchi, On the Effect of a Variable Stiffness-type Dynamic Absorber with Eddy-Current Damping, Bulletin of the JSME, Vol.21, No.160, pp.1482-1489, 1978.
(7) K. Seto, New NC Device for Feedback Controlled Feed Drive, Int. J. of MTDR, Vol.19, No.2, pp.53-67, 1979.
(8) Y. Furuya, K. Seto, M.Yamanouchi, K. Yamada, Influence of Tortional Vibration of Gear Train System on the Tooth Load, Bulletin of the JSME. Vol.23,No.176, pp.300-308, 1980.
(9) K. Iwanami, K. Seto, An Investigation of the Vibration Isolation Equipped with Dual Dynamic Dampers as a Damping Element (1st Report, Optimum Adjustment Condition for Dual Dynamic Dampers), Bulletin of the JSME, Vol.24,No.197, pp.2013-2019, 1981.
(10) K. Kaneda, K. Seto, Vibration Isolation using Feedback Control and Compound Dynamic Absorber for Portable Vibration Tools, Bulletin of the JSME, Vol.26, No.217, Vol.26, No.217, 1983.
(11) K. Iwanami, K. Seto, An Optimum Design Method for the Dual Dynamic Damper and its Effectiveness, Bulletin of the JSME, Vol.27, No.231, pp.1965-1973, 1984.
(12) K. Seto, Y. Takita, N. Tominari, The Application of a Software Servo Control System to Robot Manipulators, Bulletin of the JSME, Vol.28, No.239, pp.937-942, 1985.
(13) Y. Takita, K. Seto, T. Nakamizo, Optimal Control of Robotic Manipulators by a Software Servo Device, Bulletin of the JSME, Vol.29, No.250, pp.1274-1279, 1986.
(14) K. Seto, S. Yamashita, M. Ohkuma, A. Nagamatsu, Method of Estimating Equivalent Mass of Multi-Degree-of-Freedom System, JSME Int. J., Ser.C, Vol.30, No.268, pp.1638-1644, 1987.
(15) Y. Takita, K. Seto, The Static Balance and the Semidynamical Walking of a Quadrupedal Robot, JSME Int. J., Ser.C, Vol.32,No.1, pp.51-59, 1989.
(16) S. Yamashita, K. Seto, F. Hara, Vibration Control in Piping System by Dual Dynamic Absorbers (3-D Vibration Analysis and Absorber Design Using Transfer Matrix Method), JSME Int. J., Ser.C, Vol.32, No.4, pp.531-537, 1989.
(17) K. Seto, Active Control of Vibration of Flexible Arms, J. of Robotics and Mechatronics, Vol.2, No.1, pp.3-11, 1990.
(18) K. Sawatari, K. Seto, Vibration Control of a Plate Structure by an Active Control Device for Reducing Noise, JSME Int. J., Ser.C, Vol.33, No.3, pp.453- 459, 1990.
(19) S. Kizimoto, K. Seto, Y. Kanemitsu, A. Nagamatsu, Vibration Control of the Structure with Active Mechanical Component, JSME Int. J., Ser.C, Vol.33, No.3, pp.441-445, 1990.
(20) S. Yamashita, K. Sawatari, K. Seto, Vibration Control in Piping System by Dual Dynamic Absorbers (Realization of Piping systems with Unresonant Characteristics), JSME Int. J., Ser.C, Vol.33, No.4, pp.488- 494. 1990.
(21) K. Seto, S. Yamashita, M. Okuma, A. Nagamatsu, Simultaneous Optimum Design Method for Multiple Dynamic Absorbers to Control Multiple Resonance Peaks, SAE Technical Paper 911067, pp.229-237, 1991.
(22) K. Seto, K. Sawatari, A. Nagamatsu, M. Ishihama, Optimum Design Method for Hydraulic Engine Mounts, SAE Technical Paper 911055, pp.141-147, 1991.
(23) K. Seto, Y. Huruishi, A Study on Active Dynamic Absorber, ASME Conference, DE-Vol 38, pp.263-270, 1991.
(24) K. Seto, Active Vibration Control in Machinery, J. of the Acoustical Society of Japan, Vol.12, No.6, pp.263-272, 1991.
(25) K. Seto, Current Trends in Vibration Control, Now Future, Vol.8 No.31, pp.2-7, 1993.
(26) K. Ezure, K. Seto, S. Mitsuta, K. Sawatari, Active Vibration Control of Flexible Structures Arranged in Parallel, J. of Robotics and Mechatoronics, Vol.6, No.3, pp.243-248, 1994.
(27) K. Seto, Active Control: Control Theory as Viewed from Applications, J. of Robotics and Mechatoronics, Vol.6, No.3, pp.184-190, 1994.
(28) K. Sawatari, K. Seto, A Study on Active Vibration Control of Plate Structures for Isolating Noise, J. of Robotics and Mechatoronics, Vol.6, No.4, pp.285-291, 1994.
(29) K. Ezure, K. Seto, Experimental Study on Arrangements of Setting Points of an Actuator and Sensor for Vibration Control of Flexible Structures, J. of Robotics and Mechatoronics, Vol.6, No.4, pp.292-297, 1994.
(30) K. Seto, S. Mitsuta, A New Method for Making a Reduced-Order Model of Flexible Structures using Unobservability and Uncontroliability and its Application in Vibration control, JSME Int. J., Ser.C, Vol.37, No.3, pp.444-449, 1994.
(31) S. Mitsuta, E. Okawa, H. Itou, K. Seto, Active Vibration Control of Structures Arranged in Parallel, JSME Int. J., Ser.C, Vol.37, No.3, pp.436-443, 1994.
(32) M. Ishihama, S. Satoh, K. Seto, A. Nagamatsu, Vehicle Vibration Reduction by Transfer Function Phase Control on Hydraulic Engine Mounts, JSME Int. J., Ser.C, Vol.37, No.3, pp.536-541, 1994.
(33) K. Seto, M. Ishihama, A. Nagamatsu, K. Doi, Vibration Control of Engine Roll and Bounce Using Hydraulic Engine Mounts, J. of Robotics and Mechatoronics, Vol.7, No.4, pp.285-294, 1995.
(34) K. Iwanami, K. Suzuki, K. Seto, Vibration Control Method for Parallel Structures Connected by Damper and Spring, JSME Int. J., Ser.C, Vol.39, No.4, pp.714-720, 1996.
(35) M. Ren, K. Seto. F. Doi, Feedback Structure-Borne Sound Control of A Flexible Plate with An Electromagnetic Actuator: The Phase Lag Problem, Journal of Sound and Vibration, 205 (1), pp. 57-80, 1997.
(36) K. Seto, M. Ren, F. Doi), Feedback Vibration Control of a Flexible Plate at Audio Frequencies by using a Physical State-space Approach, Journal of the Acoustical Society of America, Vol.103, No.2 pp.924-934, 1998.
(37) K. Seto, Trends on Active Vibration and Noise Control, Int. J. of The Japan Society for Precision Engineering Vol.32, No.3, pp.155-159, 1998.
(38) Y. Fujisaki, S. Kodaka, Y. Kawagou, K. Seto, Active Suspension Control of Elastic Car Structure, Journal of Robotics and Mechatronics, Vol.10, No.1, pp.56-61, 1998.
(39) K. Seto, F. Doi, M. Ren, Vibration Control of Bridge Towers using a Lumped Modeling Approach, Trans. of ASME, J. of Vibration and Acoustic, Vol.121, pp.95-100, 1999.
(40) I.N. Kar, K. Seto, F. Doi, Multimode Vibration Control of a Flexible Structure Using H-Based Robust Control, IEEE Transactions on Mechatronics, Vol.5,No.1 pp.23-31, 2000.
(41) N. Hori, K. Seto, Vibration Control of Flexible Space Structures Based on Reduced Order Modeling Method and Filtered LQ Control Theory, JSME Int. J., Ser.C, Vol.43, No.3, pp.697-703, 2000.
(42) H. Haramoto, K. Seto, Y. Koike, Active Vibration Control of Triple Flexible Structures Arranged in Parallel, JSME Int. J., Ser.C, Vol.43, No.3, pp.712-718, 2000.
(43) I.N. Kar, T. Miyakura, K. Seto, Bending and Torsional Vibration Control of Flexible Structure Using H-Based Robust Control Law, IEEE Trans. on Control Technology, Vol.8,No.3, pp.545-553, 2000.
(44) K. Seto, M. Ren, F. Doi, Modeling and Feedback Structural Acoustics Control of a Flexible Plate, Trans. of The ASME J. of Vibration and Acoustics Vol.123 No.1 pp. 18-23, 2001.
(45) T. Sagane, H. Tajima, K. Seto, Modeling and Control of Flexible Multibody Systems: Application to Elastic Vehicles, JSME Int. J., Ser.C, Vol.46, No.2, pp.533-539, 2003.
(46) T. Shono, N. Nagasaka, M. Nishi, Y. Takagi, T. Watanabe, K. Seto, Multi-Mode Control for an Active Isolation System with an Elastic Table, JSME Int. J., Ser.C, Vol.46, No.3, pp.835-840, 2003.
(47) R.E. Christenson, B.F. Spencer, N. Hori, K. Seto, Coupled Building Control Using Acceleration Feedback, Computer-Aided Civil and Infrastructure, Engineering 18, pp.4-18, 2003.
(48) K. Seto, Control of Vibration in Civil Structures, I. Mech. E. Journal of Systems and Control Engineering, Vol.218, Part1, pp.515-525, 2004.
(49) T. Watanabe, K. Yamamoto, K. Takamura, K. Seto, Robust Vibration Control of a Flexible Robot Arm Carrying an Uncertain Load That Causes Bending/Torsional Coupling, Journal of Robotics and Mechatronics, Vol.16, No.4, , pp.426-433, 2004.
(50) K. Seto, Large Scale Structures and Their Vibration Problems, JSME Journal of System Design and Dynamics, Vol.1, No.2, pp.105-119, 2006.
Proceedings papers
[1] 1979.07 Study on a Variable Stiffness Type Dynamic Damper with Eddy-Current Damping K. Seto Proc. of the 5th IFToMM Vol.1, pp.325-328
[2] 1980.07 An Investigation on Boring Bars Equipped with a Dynamic Absorber K. Seto, K. Yamada Proc. of the 4th Int.C.P.E pp.422-427
[3] 1984.10 Vibration Control of Multi-Degree of Freedom Systems by Dynamic Absorbers K.Seto Proc. of CJVJCf84 pp.303-210
[4] 1987.08 Vibration Control in Plate Structure by Dynamic Absorbers S. Yamashita, K. Seto, M. Ohkuma, A. Nagamatsu Proc. of KSME/JSME Vibration Conference e87 pp.74-81
[5] 1987.09 Vibration Control of Multi-Degree of Freedom systems by Dynamic Absorbers i1st Reportj K. Seto, Y. Takita Proc. of ASME 11th Biennial Conf. on Mech. Vib. and Noise pp.169-175
[6] 1987.09 Vibration Control of Multi-Degree of Freedom systems by Dynamic Absorbers i2st Reportj K. Seto Proc. of ASME 11th Biennial Conf. on Mech. Vib.and Noise pp.176-181
[7] 1987.09 Effects of Dynamic Absorbers on the Vibration and Sound Radiation Characteristics of a Rectangular Plate H. Suzuki, K. Seto and et al. Proc.1987 Int. Conf. on Noise Control, Vol.1, pp.855-858
[8] 1987.09 Vibration Control of a Plate Structure by using Dynamic Absorbers for Reducing Noise T. Ono, S. Yamashita, H.Suzuki, K. Seto Proc.1987 Int. Conf. on Noise Control, Vol.1, pp.579-582
[9] 1987.09 Basic Concepts about Application of Dual Vibration Absorbers to Seismic Design of Nuclear Piping System K. Seto, F. Hara Trans. of the 9th Int. Conf. on. SMIRT, Vol.K2, pp.947-952
[10] 1988.07 The Semi-Dynamic Walking of a Quadrupedal Robot Y. Takita, K. Seto Proc. in Advances in Flexible Automation and Robotics Vol.1 pp.671-686
[11] 1988.08 Seismic Response Control in Nuclear Piping System by Dynamic Absorber F. Hara , K. Seto Proc. of 9th World Conf. on. Earthquake Eng. Vol.1 pp.791-796
[12] 1989.05 Multi-directional Walking of a Quadrupedal Robot using the Four Links Steering System Y. Takita, K. Seto Proc. of the Int. Conf. on Advanced Mechatronics pp.667-682
[13] 1989.07 A Technique of Structural Dynamic Optimization using Sensitive of Resonance and Anti-Resonance Frequencies I. Kaziwara, K. Seto and et al. Proc. of e89 ASME PVP Conf. Vol.179 pp.161-167
[14] 1989.07 An Investigation of Adjustable Pendulum-Type Vibration Controlling Equipment Y. Takita, K. Seto Proc. of e89 ASME PVP Conf. Vol.179 pp.109-115
[15] 1989.07 Vibration Control in Piping System by Dual Dynamic Absorber K. Seto, K. Sawatari, S. Yamashita Proc. of e89 ASME PVP Conf. Vol.179 pp.117-122
[16] 1989.07 Vibration Control of a Plate Structure by an Active Control Device for Reducing Noise K. Sawatari, K. Seto Proc. of e89 ASME PVP Conf. Vol.179 pp.141-146
[17] 1989.07 Vibration Control of Mechanical Structures by an Active Dynamic Absorber with a Software Control System K. Seto Proc. of e89 ASME PVP Conf. Vol.179 pp.147-153
[18] 1989.07 Vibration Control of the Structure with Active Mechanical Component S. Kijimoto, K. Seto, Y. Kanemitsu, A. Nagamatsu Proc. of e89 ASME PVP Conf. Vol.179 pp.123-128
[19] 1989.09 Vibration Control in a Tower Structure by a Two-Dimensional Active Dynamic Absorber with a Software Control System Y. Takita, K. Seto Proc. of Int. Symposium on Advanced Design e89 pp.187-192
[20] 1989.11 Vibration Control of C-Shaped Structure by Dynamic Absorbers S. Yamashita, K. Seto Proceedings of Asia Vibration Conferencee89 pp.394-399
[21] 1990.08 Theoretical Analysis and Digital Simulation of Electrical Hammers K. Kaneda, S. Ohtsu, K. Seto Proc. of the Fifth Int. Conf. on Hand Arm Vibration pp.175-178
[22] 1990.08 Theoretical Analysis Of the Shock Isolation-Type Concrete Breaker and its Effect for Preventing the Hand-Arm Vibration Syndrome K. Seto Proc. of the Fifth Int. Conf. on Hand Arm Vibration pp.179-184
[23] 1991.05 Optimum Design Method for Hydraulic Engine Mounts K. Seto, A, Nagamatsu, M. Ishihama, M. Doi, K. Sawatari Proc. of the 1991 Noise and Vibration Conf, SAE-P244 pp.141-148
[24] 1991.05 Simultaneous Optimumu Desigh Method for multiple Dynamic Absorbers@to Control Multiple Resonance Peaks S. YamashitaC K.Seto and et al. Proc. of the 1991 Noise and Vibration Conf, SAE-P244 pp.229-238
[25] 1991.10 A Study on Active Dynamic Absorber K. Seto, Y. Huruishi ASME Conference, DE-Vol 38 pp.263-270
[26] 1991.11 Investigation of an Intelligent Three-Wheel Robot Y. Takita, K. Seto Proc. of the 1991 Asia-Pacific Vib. Conf. pp.101-106
[27] 1991.11 Investigation of Magnetic Bearing using LQI Theory Y. Takita, K. Seto Proc. of the 1991 Asia-Pacific Vib. Conf. pp.332-337
[28] 1991.11 Noise Control of a Rectangular Plate Structure by using Dual Dynamic Absorbers Y. Yamashita, I. Kaziwara, K. Sawatari, K. Seto Proc. of the 1991 Asia-Pacific Vib. Conf.pp.3014-3104
[29] 1991.11 Optimum Design Method For Pendulum-Type Vibration Control Equipment K. Seto Proc. of the 1991 Asia-Pacific Vib. Conf. pp.326-331
[30] 1991.11 Active Vibration Control in Machinery K. Seto Proc. of the Acoustical Society of Japan Vol.12,No.6 pp.263-272
[31] 1991.40 Optimum Desigh Method of Active Absorbers and Its Vibration Effect K. Seto Proc. of Int. Sympo. Active Control of Sound and Vibration, pp.75-86
[32] 1992.02 Active Dynamic Absorber with Electromagnetic Force and its Vibration Control Effec K. Sawatari, K. Seto Electromagnetic Forces and Applications, Elsevierpp.485-488
[33] 1992.09 A New Method for Making a Reduced-Order Model ofnFlexible Structures using Unobservabillity and Uncontrollabillity and its Application K. Seto and et al. Proc. of 1st Int. Conf. on Motion and Vibration Control (MOVIC), Vol.1 pp.152-157
[34] 1992.09 Active Vibration Control of Structures Arranged in Parallel S. Mitsuta, K. Seto Proc. of 1st Int. Conf. on Motion and Vibration Control (MOVIC), Vol.1 pp.146-151
[35] 1992.09 Development of an Autonomous Cleaning Robot with an External Power Cable H. Furuhashi, K. Seto and et al. Proc. of 1st Int. Conf. on Motion and Vibration Control (MOVIC)Vol.1 pp.499- 504
[36] 1992.09 Development of Location and Direction Measuring System for Autonomous Mobile Robot Y. Takita, Y. Hida, K. Seto Proc. of 1st Int. Conf. on Motion and Vibration Control (MOVIC) Vol.1 pp.548- 552
[37] 1992. 09 Trends on Active Vibration Control in Japan K. Seto Proc. of 1st Int. Conf. on Motion and Vibration Control (MOVIC), Keynote Speech Vol.1 pp.1-11
[38] 1992. 09 Vibration Control of Tower Structure by a Two-Dimensional Hybrid Dynamic Absorber K. Ezure, S. Yamashita, K. Seto Proc. of 1st Int. Conf. on Motion and Vibration Control (MOVIC) Vol.1 pp.80-85
[39] 1993.08 Vibration Control Method of Multi-Degree-of-Freedom System by Active Dynamic Absorber K. Ezure, K. Sawatari, K. Seto Proc. of the 1993 JSME Int. Conf. on Adovanced Mechatronics pp.650- 654
[40] 1994.06 Vibration Control Method for Flexible Structures using an Active Dynamic Absorber K. Seto Proc. of the Int. Conf. on Vibration Engineering, ICVEf94, Beijing pp.495- 501
[41] 1994.09 Active Vibration Control of a Wall for Reducing Noise Radiated through It K. Sawatari, T. Miyata, F. Doi, K. Seto Proc. of the 2nd Int. Conf. on MOVIC Vol.1 pp.395- 400
[42] 1994.09 Damping Design in Flexible Structures using Dynamic Absorbers F. Doi, S. Matsumoto, K. Seto Proc. of the 2nd Int. Conf. on MOVIC, Vol.1, pp.486- 491
[43] 1994.09 Suitable Placement of Sensors for Preventing Spillover in Vibration control of Flexible Structures Y. Matsuno, K. Ezure, K. Seto Proc. of the 2nd Int. Conf. on MOVIC, Vol.1 pp.80- 85
[44] 1994.09 Vibration and Motion Control of Flexible Structures using Hybrid Dynamic Absorber S. Mitsuta, K. Seto, A. Nagamatsu, H. Itou Proc. of the 2nd Int. Conf. on MOVIC, Vol.1 pp.739- 744
[45] 1994.09 Vibration Control of Flexible Structures Arranged in Parallel Y. Toba, Y. Matsumoto, K. Seto, F. Doi Proc. of the 2nd Int. Conf. on MOVIC, Vol.1 pp.138-143
[46] 1995.06 Reduced Order Modeling and Vibration Control Methods for Flexible Structures Arranged in Parallel Y. Toba, Y. Matsumoto, K. Seto Proc. of the American Control Conference, No.3-6 pp.2344-2348
[47] 1995.09 Active Vibration Control of a Triple Flexible Structures Combined with Actuators K. Seto, Y. Toba, F. Doi Proc. of ASME Design Engineering Tech. Conf., DE-Vol.84-3, pp.407-415
[48] 1995.09 The Modeling and Active Control of Flexible Plate Structure for Reducing Noise Radiation T. Miyata, K. Seto, M. Ren, F. Doi Proc. of ASME Design Engineering Tech. Conf., DE-Vol.84-3, pp.359-368
[49] 1995.09 Vibration Control Method for Flexible Structures with Distributed Parameters using a Hybrid Dynamic Absorber K. Seto, S. Kondo, K. Ezure Proc. of ASME Design Engineering Tech. Conf., DE-Vol.84-3, pp.393-400
[50] 1995.11 Bending and Torsional Vibration Control for Flexible Structures Arranged in Parallel K. Seto and et al. Proc. of Asia-Pacific Vibration Conferencee95, Vol.1 pp.227-233
[51] 1996.05 Vibration Control Method for Triple Ultra Tall Buildings K. Seto Proc. of the First European Conference on Structural Control, Vol.13, World Scientific, pp.535-542.
[52]. 1996.9 Bending and Torsional Vibration Control of Flexible Structures Arranged in Parallel Y. Fukuda, Y. Matsumoto, K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.1, pp.12-17.
[53] 1996.9 Multi-Modes Vibration Suppression of Active Mass Damper System for an Actual Suspension Bridge Tower K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.1, pp.70-75
[54] 1996.9 Active Vibration Control of Elastic plate for Reducing Noise Radiation/Transmission H. Sugawara, M. RenC F. Doi, K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.1, pp.12-17.
[55] 1996.9 The Influence of Phase-Lag on Active Structure-Borne Sound Control of Flexible Plate M. Ren, F. Doi, Y. Gatade, K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.1, pp.365-370
[56] 1996.9 Structural Vibration Control for Bridge Towers under Construction (1st Report: Modeling Method for Vibration Control of Flexible Structures) H. Fujii, A. Matsuno, F. Doi, K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.2, pp.18-23
[57] 1996.9 Structural Vibration Control for Bridge Towers under Construction (2nd Report Modeling Method for Vibration Control of Flexible Structures) K. Seto, F. Doi, H. Inoue, M. Minami, M. Hisatani Proc. of the 3rd International Conference on MOVIC, Vol.2,pp.24-29
[58] 1996.9 Structural Vibration Control for Bridge Towers under Construction (3rd Report Modeling Method for Vibration Control of Flexible Structures) F. Doi, Y. Gatate, H. Inoue, R. Ohmori, K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.2,pp.30-35
[59] 1996.9 Optimal Design of Damping Devices for Vibration Control of Parallel Structures K. Kamagata, K. Miyajima, K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.2, pp.334-339
[60] 1996.9 A Study on Servo-Type Velocity and Displacement Sensor for Vibration Control K. Ida, H. Saitou, Y. Gatade, K. Seto Proc. of the 3rd International Conference on MOVIC, Vol.3, pp.188-193
[61] 1998.4 Modeling and Active Vibration Control of Flexible Structures K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC) Keynote Speech
[62] 1998.4 Vibration Control of Parallel Structures Connected With Passive Devices Designed by GA S. Sugino, D. Sakai, K. Seto, S. Kundu Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.1, pp.15-24
[63] 1998.4 Vibration Control for Multiple Building Structures Connected with Active Bridges Y. Matsumoto, F. Doi, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.1, pp.599-607
[64] 1998.4 Active and Passive Vibration Noise Control with an Elastic Support Actuator of a Flexible Plate Structure T. Yamada, H. Sugawara, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.1, pp.705-714
[65] 1998.4 Design of Active Control scheme for a Flexible Bridge Tower Structure Using H-infinity Optimal Control I.N. Kar, K. Seto, F. Doi Proc. of the Second World Conf. on Structural Control (2WCSC), Vol.2, pp.1021-1030
[66] 1998.4 Development of Servo-type Velocity and Displacement Sensor for the Vibration Control of Flexible Structures Y. Satoh, H. Saitoh, Y. Itoh, Y. Gatade, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.2, pp.1241-1250
[67] 1998.4 Structural vibration Control for Bridge Tower Model using a New Servo-type Vibration Sensor F. Doi, Y. Gatade, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC), Vol.2, pp.1251-1260
[68] 1998.4 Active Suspension Control of Elastic Car Model on the Bumpy Road Y. Kawago, K. Kodaka, D. Katou, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC), Vol.2, pp.1339-1347
[69] 1998.4 Design of Robust Control Law to Control the Vibration of 20 Story Benchmark Building in Response to Earthquakes K. Seto, Y. Matsumoto, F. Doi, I.N. Kar Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.2, pp.1361-1370
[70] 1998.4 A Study on Optimum Design of Joint Dampers Connecting Two Towers: The Case of Connecting Two Same Height Towers at Multiple Points M. Kageyama, T. Yasui, T. Suzuki, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.2, pp.1463-1472
[71] 1998.4 On the Multi-Mode Vibration Control of Piping System T. Minowa, F. Iiyama, H. Sodeyama, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.2. pp.1695-1703
[72] 1998.4 Vibration Control of Tall Structures Using Genetic Algorithms S. Kundu, S. Sugino, K. Seto Proc. of the Second World Conf. on Structural Control (2WCSC) Vol.2. pp.207-2086
[73] 1998.8 On the Development of a New Type of Absolute Displacement and Velocity Measurement Sensor Y. Satoh, Y. Shinbori, F. Doi, K. Seto Proc. of the 4th Int. Conf. on MOVIC, Vol.1, pp.213-217
[74] 1998.8 Design of H-Infinity Based Robust Control Law to Suppress the Vibration of a Flexible Bridge Tower Structure I.N. Kar, K. Seto, F. Doi Proc. of the 4th Int. Conf. on MOVIC, Vol.2, pp.429-436
[75] 1998.8 Active Vibration Control of a Bridge Tower Structure Using Filtered LQ Control Technique K. Seto, A. Ohshima, F. Doi Proc. of the 4th Int. Conf. on MOVIC, Vol.2, pp.545-551
[76] 1998.8 Genetic Algorithm Based Design of Passive Elements for Vibration Control S. Kundu, S. Sugino, K. Seto Proc. of the 4th Int. Conf. on MOVIC, Vol.3, pp.1183-1188
[77] 1998.9 Active Vibration Control of a Bridge Tower Structure Based on Physical Modeling Method and Filtered LQ Control Theory A. Ohshima, K. Seto Proc. of the First Japan-Korea Symposium of Frontiers in Vibration Science and Technology, pp.7-8
[78] 1998.9 Active Suspension Control of Elastic Car Model on the Bumpy Road D. Katou, Y. Kawagou, K. Kodaka, K. Seto Proc. of the First Japan-Korea Symposium of Frontiers in Vibration Science and Technology, pp.21-22
[79] 1998.9 Modeling and Robust Vibration Control of Flexible Bridge Tower Structures K. Seto Proc. of the First Japan-Korea Symposium of Frontiers in Vibration Science and Technology, pp.95-104
[80] 1999,4 Vibration Control for Multiple building Structures Connected with Active Bridges Y. Matsumoto, F. DoiC K. Seto Proc. of Motion and Vibration Control in Mechatronics pp.175-180
[81] 1999,4 Active Vibration Control of Triple Flexible Structures Arranged in Parallel H. Haramoto, K. Seto, Y. Koike Proc. of Motion and Vibration Control in Mechatronics pp.181-186
[82] 1999,4 Vibration Control of Flexible Space Structures Based on Reduced Order Model Method and Filtered LQ Control Theory N. Hori, K. Seto Proc. of Motion and Vibration Control in Mechatronics pp.187-192
[83] 1999,4 Vibration Control of Parallel Structures Connected with Magnetic Designed by GA D. Sakai, S. Sugino, S. Kundu, K. Seto Proc. of Motion and Vibration Control in Mechatronics pp.238-243
[84] 1999,4 Development of an Absolute Displacement Sensor for Active Vibration Control Y. Gatade, F. Doi, K. Seto Proc. of Motion and Vibration Control in Mechatronics pp.244-249
[85] 1999,4 H-infinity Based Vibration Control of a Flexible Structure I.N Kar, T. Miyakura, K. Seto Proc. of Motion and Vibration Control in Mechatronics pp.323-328
[86] 1999,9 Vibration Control of Flexible Space Structures Based on Reduced Order Modeling Method and Filtered LQ Control Theory H. Fujiwara, K. Seto The 2nd Japan-Korea (J-K) Symposium of Frontiers in Vibration Science and Technology, pp.15-16
[87] 1999,9 Many Modes of Vibration Control for Flexible Structures using H-Infinity Based Robust Control K. Seto The 2nd J-K Symposium of Frontiers in Vibration Science and Technology, pp.21-27
[88] 2000,5 Seismic Response Control of Parallel Structures Connected with Magnetic Damper Designed by GA T. Ikeya, D. Sakai, S. Kundu, T. Kobayashi, K. Seto The Fourth Asian Fuzzy Systems Symposium Vol.1 pp.138-143
[89] 2000.6 Vibration Control Using Interactive Force of Flexible Space Structures With the Same Property S. Kougo, H. Fujihara, K. Seto The 3rd Japan-Korea Symposium of Frontiers in Vibration Science and Technology, pp.7-8
[90] 2000.6 Vibration Control For Triple Building Stricture using GA K. Noguchi, T. Ikeya, K. Seto The 3rd J-K Symposium of Frontiers in Vibration Science and pp.11-12
[91] 2000.6 Motion and Vibration Control of Flexible Structures D. Fukui, Y. Ootuka, K. Seto The 3rd J-K Symposium of Frontiers in Vibration Science and Technology, pp.23-24
[92] 2000.6 Active Sound Transmission Control of a Plate Structure K. Seto The 3rd J-K Symposium of Frontiers in Vibration Science and Technology, pp.98-103
[93] 2000,12 A Proposal of Advanced Modeling for Motion and Vibration Analysis in Flexible Structures T. Shono, T. Sagane, H. Tajima, K. Seto Proc. of the 5th Int. Conf. on MOVIC, pp.791-796
[94] 2000,12 Motion and Vibration Control of a Flexible Structure Y. Ohtsuka, D. Fukui, K. Seto Proc. of the 5th Int. Conf. on MOVIC, pp.167-172
[95] 2000,12 Active Vibration Control of Coupled Buildings using Relative Movement N. Hori, R.E. Christenson, K. Seto, B.F. Spencer,Jr. Proc. of the 5th Int. Conf. on MOVIC, pp.255-260
[96] 2000,12 Vibration Control For Triple Building Stricture using GA T. Ikeya, K. Noguchi, K. Seto Proc. of the 5th Int. Conf. on MOVIC, pp.857-862
[97] 2000,12 Vibration Control of Coupled Flexible Thin Structure with Same Property Using Filtered LQ Control Theory S. Kohgo, H. Fujihara, K. Seto Proc. of the 5th Int. Conf. on MOVIC, pp.873-878
[98] 2001.09 Motion and Vibration Control of Three Dimensional Flexible Shaking Table Using LQI Control Approach H. Hiramatsu, D. Fuji T. Watanabe, K. Seto Proc. of ASME Design Engineering Tech. Conf. CD-ROM, DETC2001/VIB-21478
[99] 2001.09 A Proposal of Advanced Modeling for Motion and Vibration in Flexible Structures T. Sagane, T. Shono, K. Adachi, T. Kinoshita, H. Tajima, K. Seto Proc. of ASME Design Engineering Tech. Conf. CD-ROM, DETC2001/VIB-21317
[100] 2001.09 Vibration Control of Parallel Identical Flexible Structures Using Interactive Force S. Kohgo, H. Fujihara, K. Yoshida, H. Tanaka, T. Watanabe, K. Seto Proc. of ASME Design Engineering Tech. Conf. CD-ROM,DETC2001/VIB-21477
[101] 2001.10 Active Vibration Control for Combined Flexible Structures M. Okuyama, K. Seto Proc. of the Asia-Pacific Vibration Conference 2001 Vol.3, pp.949-952
[102] 2001.10 Development of Absolute Displacement and Velocity Sensor I. Ishiguro, Y. Miyata, K. Seto Proc. of the Asia-Pacific Vibration Conference 2001 Vol.3, pp.1050-1054
[103] 2001,10 Semi Active Controller Design for Adjacent Buildings Connected with Control Devices K. Noguchi, T. Ikeya, K. Seto Proc. of the Asia-Pacific Vibration Conference 2001 Vol.3, pp.1055-1059
[104] 2002,4 Vibration Control for Multiple Connected Building using H-infinity Control Theory K. Seto, Y. Matsumoto, I.N. Kar Proc. of 3rd World Conference on Structural Control CD-ROM, Active 2
[105] 2002,4 A New Modeling Method for Motion and Vibration Control of Flexible Structures T. Kinoshita, K. Adachi, T. Sagane, H. Tajima, K. Seto Proc. of 3rd World Conference on Structural Control CD-ROM, Active 2
[106] 2002,4 Motion and Vibration Control of Transport System with Flexible Structures H. Tanaka, D. Fuji, K. Seto, T. Watanabe Proc. of 3rd World Conference on Structural Control CD-ROM, Active 2
[107] 2002.08 Motion and Vibration Control of Three Dimensional Flexible Shaking Table Using LQI Control Approach (1) K. Seto, D. Fuji, H. Hiramatsu, T. Watanabe Proc. of 2002 American Control Conference, CD-LOM, TP07-1, 3040
[108] 2002,8 Motion and Vibration Analysis and Control of Elastic Vehicles Using the Extended Reduced Order Physical Model T. Sagane, T. Shono, K. Adachi, T. Kinoshita, H. Tajima, K. Seto Proc. of the First Asian Conference on Multibody Dynamics No.02-202 P57
[109] 2002,8 Vibration Control for a Semi-Active Controlled Building Connected with Bridges Using a MR Damper Y. Iwasaki, K. Noguchi, K. Seto Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.1-6
[110] 2002,8 Multi-mode Control for an Active Isolation System with an Elastic Table T. Shono, N. Nagasaka, M. Nishi, Y. Takagi, T. Watanabe, K. Seto Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.36-41
[111] 2002,8 Motion and Vibration Control of Three Dimensional Flexible Shaking Table D. Fuji, T. Watanabe, K. Seto Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.88-93
[112] 2002,8 Robust Control in Bending and Torsional Vibrations of a Flexible Robot Arm with Uncertainty in Payload K. Takamura, K. Yamamoto, T. Watanabe, K, Seto Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.426431
[113] 2002,8 Multimode Vibration Control of a Flexible Robot Arm Using a New Modeling Approach K. Tsuchidate, S. Yamamoto, H. Tajima, K. Seto Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.443-448
[114] 2002,8 The Development of a Displacement and Velocity Sensor for Vibration Control Y. Miyata, K. Seto, M. Saigo Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.757-761
[115] 2002,8 Motion and Vibration Analysis and Control of Elastic Vehicle Using an Extended Reduced Order Physical Model K. Adachi, T. Kinoshita, T. Sagane, T. Shono, H. Tajima, K. Seto Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.443-448
[116] 2002,8 Vibration Control of Parallel Flexible Structures with Identical Vibration Property Using Interactive Force K. Yoshida, @M. Saigo, K. Seto Proc. of the 6th Int. Conf. on MOVIC, No.02-201 pp.967-972
[117] 2002,8 Multimode Vibration Control of Flexible Rotor Using Magnetic Bearings H. Shida, M. Ichihara, K. Seto, M. Saigo 8th International Symposium on Magnetic Bearing pp.381-386
[118] 2002.09 Active Vibration Control of Flexible Building Structure K. Seto, Y. Matsumoto, I.N. Kar Proc. of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance pp.299-304
[119] 2002.09 Vibration Control for Wind Excited Actual Triple Buildings using Active Controlled Bridges K. Seto, Y. Matsumoto Proc. of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance pp.305-310
[120] 2002.12 Modeling and Vibration Control for a a Flexible Building Structure with Multiple Vibration Modes Using H-infinity Based Robust Control K. Seto, I.N.Kar, Y. Matsumoto Proc. of Mechatronics 2002CIFAC pp.55-63
[121] 2003.08 Active Vibration Control for Lightweight Isolation Table M. Nishi, T. Shono, M. Naruke T. Watanabe, K. Seto The 5th J-K Symposium of Frontiers in Vibration Science and Technology pp.17-18
[122] 2003.08 Basic research on Non-Contact Active Control System Utilizing Acoustic Radiation Pressure Y. Himura, T. Watanabe, K. Seto The 5th J-K Symposium of Frontiers in Vibration Science and Technology pp.25-26
[123] 2003.08 Motion and Multimode-Vibration Control of a Flexible Transportation System K. Takemoto, T. Watanabe, K. Seto The 5th J-K Symposium of Frontiers in Vibration Science and Technology pp.3-4
[124] 2003.08 Modeling and Motion and Vibration control for a Flexible Rotor supported by Active Magnetic Bearings M. Ichihara, T. Sagane, H. Tajima, M. Saigou, K. Seto The 5th J-K Symposium of Frontiers in Vibration Science and Technology, pp.55-56
[125] 2003.09 Implementing the Extended Reduced Order Physical Model into Commercialized Software Packages(Implem ting Model Constraints into Software Packages) T. Sagane, T. Kinoshita, H. Tajima, K. Seto ASME Design Engineering Technical Conferences
DETC2003/VIB-48330 p.599 & CD-ROM
[126] 2003.09 A New Modeling Technique and Control System Design of a Flexible Rotor Supported by Active Magnetic Bearings for Motion and Vibration Control M. Ichihara, H. Shida, M. Saigou, K. Seto ASME Design Engineering Technical Conferences DETC2003/VIB-48441 p.672 & CD-ROM
[127] 2003.09 Motion and Vibration Control of a Flexible Transportation System K. Takemoto, M. Mori, T. Watanabe, K. Seto ASME Design Engineering Technical Conferences DETC2003/VIB-48456 p.715 & CD-ROM
[128] 2003.09 Robust Control in Bending and Torsional Vibrations of a Flexible Robot Arm K. Takamura, K. Yamamoto, H. Kawabe, S.J. Dyke, T. Watanabe, K. Seto ASME Design Engineering Technical Conferences DETC2003/VIB-48330 p.599 & CD-ROM
[129] 2003.10 Hybrid Vibration Control for Flexible Structures Connected by Control Device T. Kato, T. Watanabe, K. Seto Proc. of the 10th Asia-Pacific Vibration Conference Vol.1 pp.248-252
[130] 2003.10 Hybrid Vibration Control using Active Controlled Bridges for Flexible Building Structures with the Same Dynamic Characteristics M. Sano, T. Watanabe, K. Seto Proc. of the 10th Asia-Pacific Vibration Conference Vol.2 pp.610-615
[131] 2003.10 Robust Vibration Control of Flexible Robot Arm Taking Account of an Uncertainty in Bending and Torsional Coupling K. Yamamoto, K. Takamura, T. Watanabe, K. Seto Proc. of the 10th Asia-Pacific Vibration Conference Vol.2 pp.771-776
[132] 2003.10 A New Modeling Method for Two-Link Flexible Robot Arms S. Yamamoto, T. Sagane, H. Tajima, K. Seto Proc. of the 10th Asia-Pacific Vibration Conference Vol.2 pp.777-782
[133] 2003.10 Research on Motion and Vibration Control of a Three-Dimensional Flexible Shaking Table Y. Zhang, T. Watanabe, K. Seto Proc. of the 10th Asia-Pacific Vibration Conference Vol.2 pp.847-852
[134] 2003.12 Active Suspension Control of Elastic Vehicle usingMultibody Dyna Y. Suzuki, T. Sagane, H. Tajima, K. Seto Proc. of the 7th Inter. Conf. on Mechatronics Technology pp.597-601
[135] 2003.12 Motion and Vibration Control for Flexible Isolation Table M. Naruke, T. Shono, M. Nishi, T. Watanabe, K. Seto Proc. of the 7th Inter. Conf. on Mechatronics Technology pp.609-614
[136] 2003.12 Semi Active Control for Buildings Connected with MR Damper T. Tanaka, Y. Iwasaki, K. Seto Proc. of the 7th Inter. Conf. on Mechatronics Technology pp.615-620
[137] 2003.12 Vibration Control for Flexible Space Structures K. Makita, K. Seto, T. Watanabe Proc. of the 7th Inter. Conf. on Mechatronics Technology pp.621-626
[138] 2004.07 Motion and Multimode-Vibration Control of a Flexible Transportation System K. Seto, K. Takemoto Proc. of the 2004 American Control Conference FrP09.5
[139] 2004.08 Control of Vibration in Civil Structures K. Seto Systems and Control Engineering Vol.218 Part1, pp.515-525
[140] 2004.08 Modeling and Control of Flexible Robot Arms with Two Links M. Aki, S. Yamamoto, T. Sagane, H. Tajima, T. Watanabe, K. Seto Proc. of the Second Asian Conference on Multibody Dynamics CD-ROM, pp.490-497
[141] 2004.08 Active Suspension Control of the Elastic Vehicle using Multibody DynamicsY. S uzuki, T. Sagane, H. Tajima, T. Watanabe, K. Seto Proc. of the Second Asian Conference on Multibody Dynamics CD-ROM, pp.498-505
[142] 2004.08 New Modeling Method of Flexible Multibody Systems and Its Application for Motion and Vibration Control T. Sagane, M. Ichihara, S. Yamamoto, H. Tajima, K. Seto roc. of the Second Asian Conference on Multibody Dynamics CD-ROM, pp.552-559
[143] 2004.08 A New Modeling Technique and Control System Dsign Flexible Rotor Using Active Magnetic Bearings for Motion and Vibration ControlnY. Nakajima, M. Ichihara, T. Sagane, H. Tajima, M. Saigou, K. Seto The 9th Inter. Symposium on Magnetic Bearings
CD-ROM, No.52
[144] 2004.08 Modeling Strategy Suited to Motion and Vibration Control for Flexible Structures K. Seto Proc. of the 7th Int. Conf. on MOVIC, Keynote Speech CD-ROM pp1-18
[145] 2004.08 Development of an Absolute Displacement and Velocity Sensor for Controlling Vibration in Houses N. Higure, K. Seto Proc. of the 7th Int. Conf. on MOVIC, CD-ROM
[146] 2004.08 Semi-active Vibration Control for Buildings Connected with Sponge type MR Damper T. Tanaka, S. Soma, T. Watanabe, K. Seto Proc. of the 7th Int. Conf. on MOVIC, CD-ROM
[147] 2004.08 Tree-dimensional Active Control for Lightweight Isolation Table with Consideration of Vibration of Addition Structure M. Naruke, M. Nishi, T. Shono, T. Watanabe, K. Seto Proc. of the 7th Int. Conf. on MOVIC, CD-ROM
[148] 2004.08 Connected Control Method for Flexible Structures with Same Dynamic Properties K. Makita, T. Watanabe, K. Seto Proc. of the 7th Int. Conf. on MOVIC, CD-ROM
[149] 2004.08 Vibration Control for Flexible Structures Like Solar Panels S. Ito, K. Makita, K. Seto, T. Watanabe Proc. of the 7th Int. Conf. on MOVIC, CD-ROM
[150] 2004.08 Robust Motion and Vibration Control of Flexible Robot Arm Uncertain Load Which Causers Bending and Torsional Coupling K. Nakagawa, K. Yamamoto, T. Watanabe, K. Seto Proc. of the 7th Int. Conf. on MOVIC, CD-ROM
[151] 2004.08 Modeling and Multi-Mode Vibration Control for Flexible Space Structures K. Seto, K. Makita Proc. of the 10th IEEE Inter. Conf. on Methods and Models in Automation and Robotics Vol.1 pp.647-752
[152] 2004.12 The Experimental Study for Driving Performance of Elastic Vehicles N. Kamiyama, T. Sagane, H. Tajima, K. Seto Proc. of the 3rd Int. Conf. on Vib. Engineering and Tech. of Machinery and the 4th Asia-Pacific Conf. on System Integrity, Vol.1, pp.629-635
[153] 2004.12 Seismic Response Control for Coupled Building Structures Using MR Damper S. Soma, T. Tanaka, H. Takahashi, T. Watanabe, K. Seto Proc. of the 3rd Int. Conf. on Vib. Engineering and Tech. of Machinery and the 4th Asia-Pacific Conf. on System Integrity, Vol.U pp.980-987
[154] 2005.06 Realization of Non-Contact Active Vibration Control System Utilizing Acoustic Radiation Pressure K. Fujii, T. Watanabe, K. Seto The 1st Inter. Symposium on Advanced Technology of Vibration and Sound, pp.277-281
[155] 2005.06 Active Vibration and Sound Transmission Control of Plate Structures K. Seto M. Ren The 1st Inter. Symposium on Advanced Technology of Vib. and Sound, Keynote Speech pp229-235
[156] 2005.07 Realization of Non-Contact Active Vibration Control System utilizing Acoustic Radiation Pressure Kazuto Seto 2005 IEEE International Conference
[157] 2005.07 Active Control for Lightweight Isolation Systems K. Seto, M. Naruke, Taichi Watanabe, H. Morino UTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures, Springer, pp. 297-307.
[158] 2005.08 Study on Active Control for Large-sized and Lightweight Isolation Tables H. Morino D. Watanabe M. Naruke T. Watanabe K. Seto The 6th J-K Symposium of Frontiers in Vibration Science and Technology pp.131-134
[159] 2005.08 Active Suspension Control of the Elastic Vehicle Using Multibody Dynamics T. Tashiro, T. Watanabe, H. Tajima K. Seto The 6th J-K Symposium of Frontiers in Vibration Science and Technology
pp.110-113
[160] 2005.08 Active Control of Ultrasonic Vibration and its Application to Vibration Control T. Watanabe, K. Fujii K. Seto The 6th J-K Symposium of Frontiers in Vibration Science and Technology pp.135-140
[161] 2005.08 H Robust Servo Motion and Vibrations Control of Flexible Robot Arm Y. Ryokata, K. Nakagawa, T. Watanabe K. Seto The 6th J-K Symposium of Frontiers in Vibration Science and Technology pp. 149-152
[162] 2005.09 Multimode Vibration Control and Motion Control of Three Dimensional Shaking Table T. Wakasugi, T. Watanabe, K. Seto ASME 2005 International Design Engineering Technical Conferences CD-ROM, DETC2005-85184
[163] 2005.09 Technique to Handle Local Constraints in Multibody Dynamics N. Kamiyama, M. Aki, T. Sagane, H. Tajima, K. Seto ASME 2005 International Design Engineering Technical Conferences CD-ROM, DETC2005-85188
[164] 2005.09 Motion and Vibration Control of a Flexible Transportation System used Piezoelectric Films as Sensor for Vibration Detection M. Nishikiori, T. Watanabe, K. Seto ASME 2005 International Design Engineering Technical Conferences CD-ROM, DETC2005-85192
[165] 2005.09 Vibration Control Using Connected Control Device for Two Identical Structures in Parallel K. Fujimura, K. Makita, T. Watanabe, K. Seto ASME 2005 International Design Engineering Technical Conferences CD-ROM, DETC2005-85194
[166] 2005.09 Modeling and Control for Flexible Rotor using Active Magnetic Bearings Y. Nakajima, T. Sagane, H. Tajima, T. Watanabe, K. Seto ASME 2005 International Design Engineering Technical Conferences CD-ROM, DETC2005-85195
[167] 2005.11 New Modeling Method for Flexible Large Structures taking into Consideration of Motion and Vibration Control M. Aki, H. Tajima, T. Watanabe K. Seto Proc. of the 11th Asia-Pacific Vibration Conference Vol. 1, pp.61-66
[168] 2005.11 Vibration Control for the Flexible Structures using Piezoelectric Films as Point Sensors S. Ito, T. Watanabe K. Seto Proc. of the 11th Asia-Pacific Vibration Conference Vol. 1, pp.204-210
[169] 2005.11 Seismic Response Control for Multiple Buildings Connected with MR Damper K. Seto T. Tanaka Proc. of the 11th Asia-Pacific Vibration Conference Vol. 1, pp.607-612
[170] 2006.07 A New Sensing Technology using Piezoelectric Film Sensors for Controlling Vibration of Multi-Modes in Flexible Structures K. Seto M. Nishikiori The 13th Int. Cong. on Sound and Vibration (ICSV13-Vienna)
[171] 2006.08 Modeling and Control of Motion and Vibration for Flexible Multibody Systems K. Seto The 3rd Asian Conference on Multibody Dynamics Keynote Speech, CD-ROM
[172] 2006.08 A method in extended reduced-order physical model taking into consideration of dynamics of assembled element M. Aki H. Tajima K. Seto T. Watanabe The 3rd Asian Conference on Multibody Dynamics iACMD2006), CD-ROM
[173] 2006.08 New Modeling and Control Methods for Flexible Rotors with Magnetic Bearings toward Passing through Critical Speeds Caused by Elastic Modes M. Murata H. Tajima T. Watanabe K. Seto Proc. of 10th Int. Symp. on Magnetic Bearings (200), CD-ROM
[174] 2006.08 Modeling and Motion and Vibration Control for Flexible Rotor with Many Modes of Bending Vibration Using Active Magnetic Bearings K. Seto Y. Nakajima M. Murata Chong-Won Lee Proc. of the 8th Int. Conf. on MOVIC, CD-ROM
[175] 2006.08 Development of Novel Seismometer Type Sensor for Vibration Control T. Ishihara T. Watanabe K. Seto Proc. of the 8th Int. Conf. on MOVIC, CD-ROM
[176] 2006.08 Active Suspension Control of the Elastic Vehicle using Multibody Dynamics T. Tashiro M. Yamazaki H. Tajima T. Watanabe K. Seto Proc. of the 8th Int. Conf. on MOVIC, CD-ROM
[177] 2006.08 Feed-Forward Control of MIMO System for Large-size and Lightweight Isolation Table D. Watanabe M. Naruke T. Watanabe K. Seto Proc. of the 8th Int. Conf. on MOVIC, CD-ROM
[178] 2006.08 H-Infinity Robust Servo Motion and Vibration Control of Two Links Flexible Robot Arm in Consideration to Variations of Posture Y. Ryokata K. Nakagawa T. Watanabe K. Seto Proc. of the 8th Int. Conf. on MOVIC, CD-ROM
[179] 2006.08 The Experimental Study for Driving Performance of Elastic Vehicles T. Ikeda H. Tajima T. Watanabe K. Seto Proc. of the 8th Int. Conf. on MOVIC, CD-ROM
[180] 2006.08 Dynamical Property of Non-Contact Active Vibration Control System Utilizing Acoustic Radiation Prossure S. Ito K. Fujii T. Watanabe K. Seto Proc. of the 8th Int. Conf. on MOVIC, CD-ROM
[181] 2007.09 Passive Vibration Control of Multi Buildings Connected with Hybrid MR Damper C. Iio, F. Dohnal, K. Seto T. Watanabe Proc. of DETC'07, ASME 2007 Design Eng. Tech. Conf. DETC2007-35160
[182] 2007.09 Seismic Response Control for Four High-Rise Building Structures using Connected Control Method K. Seto, C. Iio, S. Inaba, S. Mitani, F. Dohnal T. Watanabe Proc. of DETC'07, ASME 2007 Design Eng. Tech. Conf. IDETC2007-35180
[183] 2007.09 Modeling Method for elastic multibody systems with arbitary boundary conditions by using extended reduced order physical model and its application to a two-link flexible robot arm M. Aki T. Watanabe K. Seto Proc. of DETC'07, ASME 2007 Design Eng. Tech. Conf. IDETC2007-35000
[184] 2007.09 Semi-active Vibration Control for Connected High-Rise Buildings with Magneto-Rheological(MR) dampers S.Inaba, C. Iio, S.Mitani, T. Watanabe K. Seto The 7th J-K Symposium of Frontiers in Vibration Science and Technology pp.110-113
[185] 2007.09 Motion and Vibration Control of Two-link Flexible Robot Arm utilizing Extended Reduced Order of Physical Model with Arbitrary Boundary Condition K. Kai, M. Aki, T. Matsuzawa, T. Watanabe K. Seto The 7th J-K Symposium of Frontiers in Vibration Science and Technology pp.41-44
[186] 2007.09 Fundamental Research to Realize Multiple-Input Large-scale Flexible Isolation Table K. Yamazaki, D. Watanabe T. Watanabe K. Seto, H. Tanaka The 7th J-K Symposium of Frontiers in Vibration Science and Technology pp.79-82
[187] 2007.09 H-infinity Robust Servo Control of Two Links Flexible Robot Arm taking account of Posture Change and Uncertain Payload R. Aikawa, Y. Ryoukata, T. Wanabe K. Seto The 7th J-K Symposium of Frontiers in Vibration Science and Technology pp.131-134
[188] 2007.09 Non-contact Passive and Active Vibration Control Utilizing Acoustic Radiation Pressure T. Watanabe, S. Ito, H. Takao K. Seto The 7th J-K Symposium of Frontiers in Vibration Science and Technology pp.33-36
[189] 2008.07 Vibration Control For House Structures Beyond 3 Story Using Adjustable Pendulum-Type Controller Under Ground Excitation K. Kai, T. Watanabe, Y. Iwasaki K. Seto The 15th Int. Cong. on Sound and Vibration (ICSV15-Korea)
[190] 2008.07 Development of Seismometer Type Absolute Displacement Sensor for Measuring Low Frequency Range Below 1 Hz K. Seto, Y. Iwasaki, he 15th Int. Cong. on Sound and Vibration (ICSV15-Korea)

TOP@HOME